How to install large jaw crusher machine?

How to install large jaw crusher machine?

Jaw crusher is also called jaw broken, commonly known by the dynamic jaw and static jaw the two jaw plate composed of crushing chamber, to simulate the movement of animals and completed material crushing operations. Widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industry in a variety of ores and bulk materials of medium-grained broken. Maximum compressive strength of the material to be broken for 320Mpa.

Then How to install large jaw crusher machine? Seemingly simple fact really a tech job ,The following is full details on how to install.

Step one: test.

That is the test machine, is divided into two types: one is load test, and the other is no-load test is the load test.

Load test: boot device, adjust the seat and the distance between the seat rack ears. Standard is: Let the large jaw crusher continuous operation 8h, bearing temperature does not exceed 30 degrees and crushers no significant impact, percussion.

No-load test: let large jaw crusher continuous operation 2h, check jaw crusher fastener is solid, loose; standard is: Firmware solid, no loose; bearing temperature does not exceed 30 degrees and no unusual noise .

Step Two:

Start. Should carry out the following tasks before starting a large jaw crusher. Before starting, be forewarned with a tone or signal.

Check the crusher without exception.

Large jaw crusher must be sure to start under no load conditions, and this aspect is important.

After start-up, if there is not a normal phenomenon, should immediately stop.